What this bra is built to do
A balconette cut sits lower across the bust than a full-coverage bra, which is why it reads as flattering rather than modest. The Mesh Balconette Bra leans into that: sheer mesh cups, a sculpting supportive underwire and cups described as moulding to your body. The brand positions it as a piece to wear "to add some spice" — so treat lift and shape as the goal, and accept that coverage will be lower than a everyday full-cup style.
That framing matters before you start checking fit. If you want a bra that hides everything, this isn't the brief. If you want a sheer balconette that lifts and follows your shape, the checkpoints below are what to look at.
The construction you're fitting around
- Mesh Balconette Bra: Sculpting supportive underwire with cups that mould to your body. The underwire is doing the lifting work, so most fit problems trace back to how the wire sits against your ribcage rather than to the straps.

Mesh Balconette Bra - Mesh Balconette Bra: Sheer mesh cups in a balconette cut. Sheer mesh shows the outline of the bust, so a smooth, settled fit is more visible than it would be under a padded cup.
How to check the fit, in order
Work through these in sequence. Each step assumes the previous one is right, so if something feels off, go back rather than compensating further up.
- 1. Settle the underwire: Fasten the bra and scoop your bust into the cups so the wire sits flat against your ribcage under the bust, not resting on breast tissue. The brand describes the wire as sculpting and supportive; that support only works from a stable base.
- 2. Check the band: The band should hold the bra in place on its own. If you need to tighten the straps hard to keep the cups up, the band is the issue, not the straps.
- 3. Look at the cup edge: In a balconette cut the top edge sits lower by design. What you're checking is whether the mesh lies smooth against your skin or cuts in and creates a ridge. Cutting in suggests the cup is too small; gaping suggests it's too large.
- 4. Assess lift: The underwire and moulded cups should hold the bust up and forward. If the bust sits low in the cup with space above it, the cup isn't holding you and a different size is worth trying.
- 5. Adjust the straps last: Once the band and cups are settled, tighten the straps only enough to keep the top edge in place. Over-tightened straps pull the wire off your ribcage and undo the fit you just built.
Judging coverage in a sheer balconette
Balconette bras give less coverage across the top of the bust than full-cup styles, and sheer mesh makes that visible. That's a design choice, not a fault. Before you decide the fit is wrong, check whether what bothers you is the amount of coverage or the way the cup sits. If the mesh lies flat and the wire is comfortable, the cut is doing its job.
One honest trade-off: the supplied product information doesn't describe adjustable straps, strap width or a specific number of hook-and-eye settings. So when you're adjusting, work with what's on the bra in front of you rather than expecting a particular strap design.
Sizing tips from the available range
The Mesh Balconette Bra is listed in Licorice across band sizes 10 and 12, with cups from B to G depending on the band. That spread is useful for fuller busts, but it also means the right answer isn't always the size you wear elsewhere.
- Use the model notes as a reference point, not a rule: The brand lists Mae in 12B and Stefania in 14DD. Note that 14DD appears in the model notes but isn't among the sizes shown in the supplied variant list, so check availability before you set your heart on that combination.
- Check which cup letters exist in your band: Size 10 runs B to E, while size 12 runs B to G. If you're between bands and need a larger cup, the 12 band gives you more options.
- Change one variable at a time: If the band feels right but the cup doesn't, try the adjacent cup in the same band before switching bands. Changing both at once makes it hard to tell what worked.
- Expect the mesh to feel different from a padded bra: Moulded mesh follows your shape rather than creating its own. Judge the fit by whether the wire and band are comfortable and the cup lies smooth, not by whether it looks like a padded bra.
When to stop adjusting and change size
If you've settled the wire, checked the band and adjusted the straps gently, and the cup still cuts in, gapes or lets the bust sit low, the size is the thing to change. Repeated tightening of the straps won't fix a cup that's the wrong volume — it just moves the problem.
The supplied information doesn't include care instructions or washing guidance for this bra, so follow the care label that comes with it rather than guessing at a routine.

